Analyzing The Barricades to Green Supply Chain in Textile Industry of Pakistan to Attain Circular Economy Goals

  • Fahad Zafar Department of Business Administration Faculty of Management Sciences, Greenwich University, Karachi
  • Mohammad Shaiq Department of Business Administration Faculty of Management Sciences, Greenwich University, Karachi
Keywords: Circular Economy, Green Supply Chain Barriers, Green Supply Chain, Supply Chain

Abstract

Abstract Views: 0

The contemporary industrial revolution and CE primarily emphasize the need of a GSC for sustainability. The implementation of sustainable SC techniques in the textile sector, especially in developing nations such as Pakistan, presents significant challenges. The shift to a circular textile sector continues to encounter many obstacles. The present research identifies eight significant impediments to the application of GSC methods in Pakistan's textile sector concerning CE. This research aims to provide suggestions for enhancing innovations in Pakistan's textile sector. The government, in conjunction with corporate leaders, must comprehend the critical obstacles and formulate more effective CE initiatives. A questionnaire-based survey was conducted among specialists for data collecting. The DEMATEL approach was used to assess the extent of impact and interaction among the obstacles, facilitating the cataloging of these barricades into cause / effect categories. The researchers propose mitigation solutions that include an infrastructure plan and a platform strategy to facilitate the transformation of Pakistan's textile sector towards CE. The results will assist industrial businesses in formulating plans for the implementation of GSCs to attain long-term sustainability.

Downloads

Download data is not yet available.

References

Punjab Board of Investment and Trade, “Board of investment report 2020,”. [Online]. Available: https://pbit.punjab.gov.pk/system/files/Textile%20Industry.pdf

O. S. Stolka and A. O. Kubicka, “Green logistics and circular economy,” Trans. Res. Proc., vol. 39, pp. 471–479, 2019, doi: https://doi.org/10.1016/j.trpro.2019.06.049.

M. Lieder and A. Rashid, “Towards circular economy implementation: A comprehensive review in context of manufacturing industry,” J. Clean. Prod., vol. 115, pp. 36–51, Mar. 2016, doi: https://doi.org/10.1016/j.jclepro.2015.12.042.

M. Mura, M. Longo, and S. Zanni, “Circular economy in Italian SMEs: A multimethod study,” J. Clean. Prod., vol. 245, Feb. 2020, Art. no. 118821, doi: https://doi.org/10.1016/j.jclepro.2019.118821.

P. Rosa, C. Sassanelli, A. Urbinati, D. Chiaroni, and S. Terzi, “Assessing relations between circular economy and Industry 4.0: A systematic literature review,” Int. J. Prod. Res., vol. 58, pp. 1662–1687, 2020, doi: https://doi.org/10.1080/00207543.2019.1680896.

V. Prieto-Sandoval, C. Jaca, J. Santos, R. J. Baumgartner, and M. Ormazabal, “Key strategies, resources, and capabilities for implementing circular economy in industrial small and medium enterprises,” Corp. Soc. Responsib. Environ. Manag., vol. 26, no. 6, pp. 1473–1484, 2019, doi: https://doi.org/10.1002/csr.1761.

G. Yadav, S. Luthra, S. K. Jakhar, S. K. Mangla, and D. P. Rai, “A framework to overcome sustainable logistics challenges through solution measures of Industry 4.0 and circular economy: An automotive case,” J. Clean. Prod., vol. 254, p. 112–120, 2020, doi: https://doi.org/10.1016/j.jclepro.2020.120112.

C. Turner et al., “Sustainable production in a circular economy: A business model for re-distributed manufacturing,” Sustainability, vol. 11, no. 16, Aug. 2019, Art. no. 4291, doi: https://doi.org/10.3390/su11164291.

C. G. Machado, M. P. Winroth, and E. H. D. R. da Silva, “Sustainable manufacturing in industry 4.0: An emerging research agenda,” Int. J. Prod. Res., vol. 58, pp. 1462–1484, 2020, doi: https://doi.org/10.1080/00207543.2019.1652777.

S. Agrawal, D. Kumar, R. K. Singh, and R. K. Singh, “Coordination issues in managing the reverse logistics: A systematic literature review and future research directions,” Benchmarking: An Int. J., vol. 30, no. 4, pp. 1259–1299, May 2022, doi: https://doi.org/10.1108/BIJ-08-2021-0467.

F. Figge, A. S. Thorpe, P. Givry, L. Canning, and E. Franklin-Johnson, “Longevity and circularity as indicators of eco-efficient resource use in the circular economy,” Ecol. Econ., vol. 150, pp. 297–306, Aug. 2018, doi: https://doi.org/10.1016/j.ecolecon.2018.04.030.

F. Z. Ahmed, A. Greenleaf, and A. Sacks, “The paradox of export growth in areas of weak governance: The case of the ready-made garment sector in Bangladesh,” World Dev., vol. 56, pp. 258–271, Apr. 2014, doi: https://doi.org/10.1016/j.worlddev.2013.11.001.

E. Fontana and N. Egels-Zandén, “Non sibi, sed omnibus: Influence of supplier collective behavior on corporate social responsibility in the Bangladeshi apparel logistics,” J. Bus. Ethics, vol. 159, no. 4, pp. 1047–1064, 2019, doi; https://doi.org/10.1007/s10551-018-3828-z.

J. Singh and I. Ordoñez, “Resource recovery from post-consumer waste: Important lessons for the upcoming circular economy,” J. Clean. Prod., vol. 134, pp. 342–353, Oct. 2016, doi: https://doi.org/10.1016/j.jclepro.2015.12.020.

D. Hussain, D. A. Dzombak, P. Jaramillo, and G. V. Lowry, “Comparative lifecycle inventory (LCI) of greenhouse gas (GHG) emissions of enhanced oil recovery (EOR) methods using different CO2 sources,” Int. J. Greenh. Gas Control, vol. 16, pp. 129–144, Aug. 2013, doi: https://doi.org/10.1016/j.ijggc.2013.03.006.

S. Bag, G. Yadav, L. C. Wood, P. Dhamija, and S. Joshi, “Industry 4.0 and the circular economy: Resource melioration in logistics,” Resour. Policy, vol. 68, pp. 101776–101900, Oct. 2020, doi: https://doi.org/10.1016/j.resourpol.2020.101776.

D. Chhabra, S. K. Garg, and R. K. Singh, “Analyzing alternatives for green logistics in an Indian automotive organization: A case study,” J. Clean. Prod., vol. 167, pp. 962–969, Nov. 2017, doi: https://doi.org/10.1016/j.jclepro.2017.02.158.

F. Garcia-Muiña, R. González-Sánchez, A. Ferrari, and D. Settembre-Blundo, “The paradigms of industry 4.0 and circular economy as enabling drivers for the competitiveness of businesses and territories: the case of an Italian ceramic tiles manufacturing company,” Soc. Sci., vol. 7, no. 12, Dec. 2018, Art. no. 255, doi: https://doi.org/10.3390/socsci7120255.

A. Longoni and R. Cagliano, “Environmental and social sustainability priorities,” Int. J. Oper. Prod. Manag., vol. 35, no. 2, pp. 216–245, Feb. 2015, doi: https://doi.org/10.1108/IJOPM-04-2013-0182.

Y. Liu and Y. Bai, “An exploration of firms’ awareness and behavior of developing circular economy: An empirical research in China,” Resour. Conserv. Recycl., vol. 87, pp. 145–152, June 2014, doi: https://doi.org/10.1016/j.resconrec.2014.04.002.

G. Dutta, R. Kumar, R. Sindhwani, and R. K. Singh, “Digital transformation priorities of India’s discrete manufacturing SMEs—a conceptual study in perspective of Industry 4.0,” Compet. Rev. An Int. Bus. J., vol. 30, no. 3, pp. 289–314, Jan. 2020, doi: https://doi.org/10.1108/CR-03-2019-0031.

S. Yadav and S. P. Singh, “Blockchain critical success factors for sustainable logistics,” Resour. Conserv. Recycl., vol. 152, Jan. 2020, Art. no. 104505, doi: https://doi.org/10.1016/j.resconrec.2019.104505.

A. Gupta and R. K. Singh, “Applications of emerging technologies in logistics sector for achieving circular economy goals during COVID-19 pandemic: Analysis of critical success factors,” Int. J. Logis. Res. Appl., vol. 27, no. 4, pp. 451–472, Oct. 2021, doi: https://doi.org/10.1080/13675567.2021.1985095.

V. Shivajee, R. K. Singh, and S. Rastogi, “Manufacturing conversion cost reduction using quality control tools and digitization of real-time data,” J. Clean. Prod., vol. 237, Nov. 2019, Art. no. 117678, doi: https://doi.org/10.1016/j.jclepro.2019.117678.

S. Jain, G. Shao, and S.-J. Shin, “Manufacturing data analytics using a virtual factory representation,” Int. J. Prod. Res., vol. 55, no. 18, pp. 5450–5464, Jul. 2017, https://doi.org/10.1080/00207543.2017.1321799.

M. R. Pedersen et al., “Robot skills for manufacturing: From concept to industrial deployment,” Robot. Comput. Integr. Manuf., vol. 37, pp. 282–291, Feb. 2016, https://doi.org/10.1016/j.rcim.2015.04.002.

J.-P. Rodrigue, B. Slack, and C. Comtois, “Green logistics,” in Handbook of Logistics and Supply-Chain Management, A. M. Brewer, K. J. Button, and D. A. Hensher, Eds., Emerald Group Publishing Limited, 2017, vol. 2, pp. 339–350.

S. Luthra, D. Garg, and A. Haleem, “Green supply chain management,” J. Adv. Manag. Res., vol. 11, no. 1, pp. 20–46, 2014.

K. Mathiyazhagan, K. Govindan, and A. Noorul-Haq, “Pressure analysis for green logistics management implementation in Indian industries using analytic hierarchy process,” Int. J. Prod. Res., vol. 52, no. 1, pp. 188–202, 2004, doi: https://doi.org/10.1080/00207543.2013.831190.

A. Sbihi and R. W. Eglese, “Combinatorial optimization and green logistics,” Ann. Oper. Res., vol. 175, no. 1, pp. 159–175, Mar. 2010, doi: https://doi.org/10.1007/s10479-009-0651-z.

H. Sonar, A. Mukherjee, A. Gunasekaran, and R. K. Singh, “Sustainable logistics management of automotive sector in context to the circular economy: A strategic framework,” Bus. Strat. Environ., vol. 31, no. 7, pp. 3635–3648, Nov. 2022, doi: https://doi.org/10.1002/bse.3112

R. Adams, S. Jeanrenaud, J. Bessant, D. Denyer, and P. Overy, “Sustainability-oriented innovation: A systematic review,” Int. J. Manag. Rev., vol. 18, no. 2, pp. 180–205, May 2015, doi: https://doi.org/10.1111/ijmr.12068.

D. L. M. Nascimento et al., “Exploring industry 4.0 technologies to enable circular economy practices in a manufacturing context,” J. Manuf. Technol. Manag., vol. 30, pp. 607–627, 2019, doi: https://doi.org/10.1108/JMTM-03-2018-0071.

K. Mathiyazhagan, V. Agarwal, A. Appolloni, T. Saikouk, and A. Gnanavelbabu, “Integrating lean and agile practices for achieving global sustainability goals in indian manufacturing industries,” Technol. Forecast. Soc. Change, vol. 171, Oct. 2021, Art. no. 120982, doi: https://doi.org/10.1016/j.techfore.2021.120982.

Y. A. Fatimah, K. Govindan, R. Murniningsih, and A. Setiawan, “Industry 4.0 based sustainable circular economy approach for smart waste management system to achieve sustainable development goals: A case study of Indonesia,” J. Clean. Prod., vol. 269, Art. no. 122263, Oct. 2020, doi: https://doi.org/10.1016/j.jclepro.2020.122263.

P. Rao and D. Holt, “Do green supply chains lead to competitiveness and economic performance?” Int. J. Oper. Prod. Manag., vol. 25, no. 9, pp. 898–916, Sep. 2005, doi: https://doi.org/10.1108/01443570510613956.

R. K. Singh, S. Kumar Mangla, M. S. Bhatia, and S. Luthra, “Integration of green and lean practices for sustainable business management,” Bus. Strategy Environ., vol. 31, no. 1, pp. 353–370, Jan. 2022, doi: https://doi.org/10.1002/bse.2897.

P. Ghisellini, C. Cialani, and S. Ulgiati, “A review on circular economy: The expected transition to a balanced interplay of environmental and economic systems,” J. Cleaner Prod., vol. 114, no. 4, pp. 11–32, Feb. 2016, doi: https://doi.org/10.1016/j.jclepro.2015.09.007.

O. Okorie, K. Salonitis, F. Charnley, M. Moreno, C. Turner, and A. Tiwari, “Digitisation and the circular economy: A review of current research and future trends,” Energies, vol. 11, no. 11, Nov. 2018, Art. no. 3009, doi: https://doi.org/10.3390/en11113009.

R. Kumar, “Espousal of industry 4.0 in Indian manufacturing organizations: Analysis of enablers,” in Research Anthology on Cross-Industry Challenges of Industry 4.0, Information Resources Management Association, 2021.

Q. Zhu and J. Sarkis, “Relationships between operational practices and performance among early adopters of green logistics management practices in Chinese manufacturing enterprises,” J. Oper. Manag., vol. 22, no. 3, pp. 265–289, June 2004, doi: https://doi.org/10.1016/j.jom.2004.01.005.

L. Oliveira et al., “An overview of problems and solutions for urban freight transport in Brazilian cities,” Sustainability, vol. 10, no. 4, Apr. 2018, Art. no. 1233, doi: https://doi.org/10.3390/su10041233.

J. Kaur, R. Sidhu, A. Awasthi, S. Chauhan, and S. Goyal, “A DEMATEL based approach for investigating barriers in green logistics management in Canadian manufacturing firms,” Int. J. Prod. Res., vol. 56, pp. 312–332, 2018, doi: https://doi.org/10.1080/00207543.2017.1395522.

V. Blok et al., “From best practices to bridges for a more sustainable future: Advances and challenges in the transition to global sustainable production and consumption,” J. Clean. Prod., vol. 108, pp. 19–30, Dec. 2015, doi: https://doi.org/10.1016/j.jclepro.2015.04.119.

S. Seuring and M. Müller, “From a literature review to a conceptual framework for sustainable logistics management,” J. Clean. Prod., vol. 16, no. 15, pp. 1699–1710, 2008.

J. Lee, B. Bagheri, and H.-A. Kao, “A cyber-physical systems architecture for industry 4.0-based manufacturing systems,” Manuf. Lett., vol. 3, pp. 18–23, Jan. 2015, doi: https://doi.org/10.1016/j.mfglet.2014.12.001.

Ericsson. (2015). Every. thing. connected. – A study of the adoption of ‘internet of things’ among Danish companies [PowerPoint Slides]. Available: http://digital.di.dk/SiteCollectionDocuments/Analyser/IoT_Report_onlineversion.pdf.

B. Ageron, A. Gunasekaran, and A. Spalanzani, “Sustainable supply management: An empirical study,” Int. J. Prod. Econ., vol. 140, no. 1, pp. 168–182, Nov. 2012, doi: https://doi.org/10.1016/j.ijpe.2011.04.007.

V. Rizos et al., “Implementation of circular economy business models by small and medium-sized enterprises (SMEs): Barriers and enablers,” Sustainability, vol. 8, no. 11, Nov. 2016, Art. no. 1212, doi: https://doi.org/10.3390/su8111212.

S. A. R. Khan and D. Qianli, “Does national scale economic and environmental indicators spur logistics performance? Evidence from UK,” Environ. Sci. Pollut. Res., vol. 24, no. 34, pp. 26692–26705, Sep. 2017, doi: https://doi.org/10.1007/s11356-017-0222-9.

K.-Y. Lin, “User experience-based product design for smart production to empower industry 4.0 in the glass recycling circular economy,” Comput. Ind. Eng., vol. 125, pp. 729–738, Nov. 2018, doi: https://doi.org/10.1016/j.cie.2018.06.023.

M. I. Khan, S. Khan, and A. Haleem, “Analysing barriers towards management of Halal logistics: A BWM approach,” J. Islamic Mark., vol. 13, no. 1, pp. 66–80, May 2019, doi: http://dx.doi.org/10.1108/JIMA-09-2018-0178.

R. M. Dijkman, B. Sprenkels, T. Peeters, and A. Janssen, “Business models for the Internet of Things,” Int. J. Inf. Manage., vol. 35, no. 6, pp. 672–678, Dec. 2015, doi: https://doi.org/10.1016/j.ijinfomgt.2015.07.008.

V. Mani, C. J. C. Jabbour, and K. T. N. Mani, “Supply chain social sustainability in small and medium manufacturing enterprises and firms’ performance: Empirical evidence from an emerging Asian economy,” Int. J. Prod. Econ., vol. 227, 2020, Art. no. 107656, doi: http://dx.doi.org/10.1016/j.ijpe.2020.107656.

O. A. AlJaberi, M. Hussain, and P. R. Drake, “A framework for measuring sustainability in healthcare systems,” Int. J. Healthc. Manag., vol. 13, no. 4, pp. 276–285, 2020, doi: http://dx.doi.org/10.1080/20479700.2017.1404710.

L. Uden and H. Wu, “How the Internet of Things can help knowledge management: a case study from the automotive domain,” J. Knowl. Manag., vol. 21, no. 1, pp. 57–70, Feb. 2017, doi: http://dx.doi.org/10.1108/JKM-07-2015-0291.

K. Govindan, M. Kaliyan, D. Kannan, and A. N. Haq, “Barriers analysis for green logistics management implementation in Indian industries using analytic hierarchy process,” Int. J. Prod. Econ., vol. 147, pp. 555–568, Jan. 2014, doi: https://doi.org/10.1016/j.ijpe.2013.08.018.

A. Tukker, “Product services for a resource-efficient and circular economy - A review,” J. Clean. Prod., vol. 97, pp. 76–91, June 2015, doi: https://doi.org/10.1016/j.jclepro.2013.11.049.

S. Rajput and S. P. Singh, “Connecting circular economy and Industry 4.0,” Int. J. Inf. Manag., vol. 49, pp. 98–113, Dec. 2019, doi: https://doi.org/10.1016/j.ijinfomgt.2019.03.002.

A. Kumar and G. Dixit, “An analysis of barriers affecting the implementation of e-waste management practices in India: A novel ISM-DEMATEL approach,” Sustain. Prod. Consum., vol. 14, pp. 36–52, Apr. 2018, doi: https://doi.org/10.1016/j.spc.2018.01.002.

Published
2025-03-15
How to Cite
[1]
F. Zafar and M. Shaiq, “Analyzing The Barricades to Green Supply Chain in Textile Industry of Pakistan to Attain Circular Economy Goals”, JDT, vol. 4, no. 1, pp. 24–47, Mar. 2025.
Section
Articles